Teledyne Reynolds Teledyne Reynolds coords=

Home    Company Information    Products & Services    Customer Support    Teledyne Companies


Products
High Voltage Wire and Cable
High Voltage Single-Pin Connectors
38999 High Voltage Hi/Mate Contacts
High Voltage Multi-Pin Connectors
Sub-D Hi/Mate
Advanced Series
Fiber Optic Connectors
Ceramic to Metal Brazed Connectors
High Voltage Capacitors
Spark Gap
High Voltage Multipliers
Special Products

Company Information
About Us
Facilities
History
Directory

Contact Us
Customer Satisfaction Survey
Sales
RMA Request for Helmet Mounted Display Harness Assemblies
Supplier Portal
Search

Terms and Conditions


Series 600
A complete line of subminiature coaxial high voltage connectors. The series 600 is rated at 5 KVDC for altitude operation over the temperature range of -55°C thru + 125°C. Various adapters are available on special order.
Series 600 S “Space Use”
Series 600 S “Space Rated” connectors are designed to operate over a long period of time in the hard vacuum of space. The operating voltage is 5 KVDC at a minimum vacuum of 10 millitorr to deep space.




Series 600 S connectors and cable assemblies are not interchangeable with series 600 connectors or cable assemblies and should not be used in any application other than one with a minimum vacuum of 10 millitorr or in deep space.
Series 610
The series 610 has a larger coupling nut and threads than the series 600 and is recommended for airborne applications or any application where numerous mating operations are required. Series 600 and 610 connectors are not interchangeable and can therefore be used for polarization to prevent cross mating in multiple circuit applications.
Series 600 & 610 cable assemblies effect an altitude seal through the use of internal seals. This design feature allows the mated assemblies to operate at altitudes up to 70,000 ft. with no encapsulation within a temperature range of
-55°C to + 125°C. While plugs (kits) are available for customer-fabricated cable assemblies, Reynolds highly recommends purchasing cable assemblies because of difficulties customers may experience in assembly and testing. Panel connectors require encapsulation at the junction of the terminal and the insulator.

Interface cleaning
High voltage connectors must always be cleaned prior to mating. The proper cleaning method is to wipe or spray the interface area with isopropyl alcohol and immediately blow an inert gas such as dry nitrogen over the interface area until dry. No other cleaning method should be attempted.

WARNING: These connectors should NEVER be handled, mated or unmated when voltage is applied.

Download PDF for all 600 Series General Specifications

<<Back Back to Contents Next>>


View Quote Request Submit Tech Support Request






Home | Terms and Conditions | Careers | Search | Contact Us | Webmaster

5005 McConnell Ave. - Los Angeles, California, 90066-6734
Copyright © 2011 Teledyne Technologies Incorporated. All rights reserved.