TRI leads the connector industry worldwide in the design of high voltage connectors and cable assemblies rated for use at voltages from 5 kVDC to 50 kVDC at altitudes of 70,000 feet (21.34 km) and above while exposed to temperatures as low as -55°C and up to 125°C. While not all connector designs offered by TRI in this website are designed to operate at those extremes, all will perform with a high degree of reliability when operated as specified. Features include:

  • Several families of products are available as connector kits, also called bag assemblies, to allow for assembly at the customer's location or field installation
  • Pre-terminated and tested cable assemblies built to length for customers that prefer a complete solution
  • Connectors that use Teledyne Reynolds' patented Advanced Interface Sealing System™. Technologically advanced, these connectors represent the state-of-the-art in high voltage connector design and manufacture.

​​​​JR Series​​​​ ​​​•6 k​VD​C​•4 ​​& 6-pin​

Altitude Rating
70,000 ft (21.34 km)

Operating Temperature
-55º to 125ºC​​​​​​​

Current Rating
3 Amps 

The JR Series of subminiature high voltage cable assemblies that utilize Teledyn​e Reynolds' patented Advanced Interface Sealing SystemTM  are ideally designed to interconnect low power, mini-TWTs to a power supply in Radar or Electronic Countermeasure (ECM) systems. Since their introduction, these high contact density assemblies have also found applications in laser systems, photomultiplier detection systems, night vision systems, Space instruments and other applications where high voltage in a small package with a highly, flexible cable harness is required.

JR Series connectors are only available as pre-assembled plug or receptacle cable assemblies with e ach assembly wired with Teledyne Reynolds’ Ready-to-Bond™ etched FEP or silicone coated, FEP wire. Both shielded and un-shielded configurations are available.

​View Products   •  Download PDF                           

1407 Series 10 k​V​D​C​•7-pin


Altitude Rating

70,000 ft (21.34 km)

Operating Temperature
-55º to 125ºC​​​​​​​ 

Current Rating
10 Amps 

The 1407 Series is a ruggedized 7-pin, bayonet cou​pled connector family that has been used extensively in airborne Traveling Wave Tube (TWT) and TWT Amplifier (TWTA) applications. The 1407 comes in, both, shielded and non-shielded configurations with plug kits that are available for customer-fabricated cable assemblies using Teledyne Reynolds’ high voltage wire. 

View Products  •  Download PDF 

PeeWee Series ​​•12 k​VD​C​2-pin

Altitude Rating
70,000 ft (21.34 km)

Operating Temperature
-55º to 125ºC​​​​​​​

Current Rating
5 Amps 

The PeeWee Series is another of Teledyne Reynolds' family of subminiature, high voltage connectors for use in applications where dense electronic packaging is required. Enabled by Teledyne Reynolds' patented Advanced Interface Sealing SystemTM; this unique method of sealing the high voltage interface at reduced atmospheric pressure to enable the series to be rated at 12 kVDC at 70,000 ft with a temperature range of -55° to 125°C.

View Products  •  Download PDF

Hi/Mate​™ Series ​•1​3.5 k​VD​C​​•​Various Pins


Altitude Rating

70,000 ft (21.34 km)

Operating Temperature
-55º to 125ºC​​​​​​​ 

Current Rating
5 Amps 

 

The Hi/MateTM Series are miniature insertable/removeable high voltage contact assemblies for use in MIL-C-38999 Series I, III and IV off-the-shelf connectors having a 12 gauge, rear release, contact retention cavity.

Hi/MateTM contact assemblies expand the capability of MIL-C-38999 connectors, by adapting them to carry 13.5 kVDC from sea level to airborne applications up to 70,000 feet altitude over a temperature range of -55° to 125°C. These contact assemblies are, in actuality, independent high voltage connectors, and do not rely upon the dielectric properties of the MIL-C-38999 insert; making the Hi/MateTM ideally suited to be combined in inserts with fiber optic, coaxial or low voltage pins, since the insert is merely a holder for the Hi/MateTM contact and Advanced Interface SealTM.    

View Products  •  Download PDF

Hi/MateD​​™ Series​​ ​• ​​13.5 k​VD​C​•Various Pins


Altitude Rating

70,000 ft (21.34 km)

Operating Temperature
-55º to 125ºC​​​​​​​ 

Current Rating
5 Amps 

 

T​​he Hi/MateDTM Series of high voltage insertable/removeable contact assemblies are rated at 13.5 kVDC and are designed to be fitted into a Subminiature-D (Sub-D) connector 8 gauge insert cavity. TheHi/MateDTM contact assemblies are fully compatible with low voltage signal, coaxial, fiber optic and power contacts in the same Sub-D connector. These contact assemblies are independent high voltage connectors, and do not rely upon the dielectric properties of the Sub-D insert.   

Complete cable assemblies with Hi/MateDTM high voltage contact assemblies installed into Positronic® ​CBD/CBM Series Subminiature-D connectors, are available from Teledyne Reynolds as fully tested units.

Positronic® is a trademark owned by Positronic Industries, Inc.

View Products  •  ​Download PDF​ 

1804 Seri​es 15 k​VD​C4-pin
​1807 Series15 k​VD​C7-pin


Altitude Rating

70,000 ft (21.34 km)

Operating Temperature
-55º to 125ºC​​​​​​​

Current Rating
13 Amps 

The 1804 and 1807 Series of ruggedized 4 and 7-pin connectors have been used in applications ranging from military vehicle electric reactive armor to airborne Synthetic Aperture Radar. The 1807 has even been used on the Ion Propulsion systems that have propelled some of NASA and JAXA’s most successful spacecraft into Deep Space.

Both the 1804 and 1807 use the same connector housings which come in shielded and non-shielded configurations with either threaded or bayonet coupling nuts. Plug kits are available for customer-fabricated cable assemblies using Teledyne Reynolds’ specified wire.  

View Products  •  Download PDF

 

Home | Terms and Conditions | Careers | Search | Contact Us      

5005 McConnell Avenue, Los Angeles, California, 90066-6734
Copyright © 2017 Teledyne Technologies Incorporated. All rights reserved.